The information below confirms the requirements of hiring a Luxury Spa Hot Tub ……
Good parking for a large van directly outside of your premises and a level straight run with no tight turns to it’s location, so it can be rolled into it’s position. Minimum width 76cm Height 184cm. The surface for the spa should be level and flat. If on grass or gravel a protective groundsheet should be supplied.
Our Luxury Spas are available for a minimum of five days hire and includes local delivery / pick up, set up and chemicals ( including water pump out ).
If you have a combi boiler, it is possible to hot fill/part hot fill using an indoor kitchen or utility room hot tap you can then use the hot tub straight away. We have tap to hose connectors and hose pipes that you can borrow if required.
PLEASE NOTE: If you have to cold fill it takes up to 24 hours to reach temperature. Please bare this in mind when choosing your hire dates.
You will need access to electricity ( power point within 25 metres from where tub is placed ) & water ( you need a garden hose long enough to reach tub – we have them if you don’t – but you must request this if required ). There also needs to be a drain within 40 ft of the tub ( usually at the bottom of a drain pipe running down the side or rear of the house or a manhole cover ) – so we can pump out and dispose of the water at pick up.